Description
Notice: It is Empty Frame. Comes unassembled. Need build by buyers.
Specifications:
Brand name: HSKRC
Model: MAK4
Item name: 295mm wheelbase Carbon Fiber Frame Kit
Color: Red/Grey/Blue
Wheelbase:295mm
Arm thickness: 5MM
Upper center board: 2.5MM
Lower center plate: 2.5MM
Camera Mount Width: 19mm
Camera protection frame board thickness: 2MM
Plywood thickness: 2MM
Size: 193*223MM
weight: about 128g
Recommended configuration(not included):
Flight control: 20x20mm 30.5×30.5mm F4/F405/F722
Motor:2306/2806.5/2806
ESC: 35A-60A Split/4-in-1
Battery: 4S 1800mAh ~ 6S 2200mAh
Propeller: supports up to 7 inches (7040)
GPS: BN220 (22x20x6mm)
The following Parts are compatible:( NOT Included)
| FC & ESC Stack | 20x20mm iFlight BLITZ Mini F7 FC Mini E55 ESC | 30.5×30.5mm GEPRC TAKER F405 HD V2 FC & 50A ESC |
| Brushless Motor | FlysfishRC Flash 2806.5 1350KV 1750KV 4-6S | iFlight XING 2806.5 1300KV 3-6S |
| Propeller | Gemfan Flash 7040 3-Blade | HQProp 7040 7 Inch 3-Blade |
| FPV Camera | Caddx Ratel2 1200TVL | Caddx Ratel2 1200TVL |
| Lipo Battery | ZOP Power 4S 14.8V 1800mAh 120C | CNHL G+Plus 22.2V 2200mAh 70C 6S LiPo Battery |
Features:
-Flight is smooth and FPV shooting is easier and more elegant.
-H-shaped structure does not affect the flying experience at all. On the contrary, compared with the X-shaped structure, the arm is shorter and lighter. At the same time, the arm strength is higher.
-The H-shaped layout has more installation space in the middle section of the cabin and a lower center of gravity, making the flight more stable.
-The installation size of the FPV lens is 19mm wide
-Flight control installation positions with two hole spacings of 30.5*30.5 and 20*20 are reserved at the front and rear of the cabin. Suitable for the installation of a variety of flight control equipment.
-Fixed motor mounting hole spacing: 16*16/16*19/19*19mm are compatible.
-The corners of the entire machine are chamfered to create a fine workmanship and reasonable structure. Of course, there are also customized thickened aluminum tubes to ensure the strength of the frame.
Package Included:
1x Frame Kit
1x Set of 3D Printed Parts
