Description
Adjust the power level and frequency: If the Tramp pin cable on VTx is connected with FC, then the button doesn’t work.
Specifications:
Name: Reaper Extreme V3Frequency4.9G~6G
Input Voltage: 9~36V
Output Voltage: 5V
Channels: 80CH
Power: Pit/25mW/200mW/500mW/1.5W/2.5W, red light flash 1/2/3/4/5 times correspondingly(2.5W default, frequency locked but can be unlocked.)
Pit: Double click to enterWeight: 13g
Mounting Hole: 30.6*22.2 mm Or 20*20mm M2 2.5mm depth
Size: 36*27.5*8mm
Consumption: 1.2A/9V
Package Included:
1 x VTX
1 x Silicon Cable
Unlock the frequencies and power levels
Long press the ‘KEY’ button until the Red LED (PWR) is constant on, off, then on again, release the button unlock the all frequencies and power levels, flashed Red LED means in unlocked status, constant Red LED means in locked status.
PIT Mode On/Off
Double-click the ‘KEY’ button to turn on/off the PIT Mode. Red LED (PWR) off means PIT mode on; Red LED (PWR) on means PIT mode offIn PIT mode, VTx outpout extreme low power.
| Band | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
| Band A | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 |
| Band B | 5733 | 5752 | 5771 | 5790 | 5809 | 5828 | 5847 | 5866 |
| Band E | 5705 | 5685 | 5665 | 5645 | 5885 | 5905 | 5925 | 5945 |
| Band F | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
| Band R | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 |
| Band H | 5653 | 5693 | 5733 | 5773 | 5813 | 5853 | 5893 | 5933 |
| Band L | 5333 | 5373 | 5413 | 5453 | 5493 | 5533 | 5573 | 5613 |
| Band U | 5325 | 5348 | 5366 | 5384 | 5402 | 5420 | 5438 | 5456 |
| Band O | 5474 | 5492 | 5510 | 5528 | 5546 | 5564 | 5582 | 5600 |
| Band X | 4990 | 5020 | 5050 | 5080 | 5110 | 5140 | 5170 | 5200 |
Note:
If tramp cable is connected, button will not work, can not adjust frequency and power, controller will take over.
BetaFlight only can accept 64 channels at most, so the O band is removed from the frequency table default.
